BootCamp Download Stuck – How to Get Drivers for Macs to run Windows 7 or 8

— updated after BootCamp 5 release June 2013 —

Where can you get a direct download of Windows drivers for Macs if BootCamp is stuck, and says 'could not continue' or you have some other problem downloading the drivers?

The brute force solution: it’s a darned large download, so physically take your machine to somewhere with a very fast internet connection that can download 600MB – 1GB in a couple of minutes. There, you’re done. Especially if you have a laptop, this would be the simplest solution - even take it to an Apple Store.

For the rest of us:

  1. If not, then first find out your Mac's ModelIdentifier
    • Q: How do I find my Mac's Model Identifier?
      A: Open System Information, and look in the Hardware Overview section.
      In other words: Click Apple menu -> About this Mac -> More Info… -> System Report -> Hardware. Now, read down the list in the Hardware Overview panel, looking for Model Identifier
    • If you're stuck, see the note below.
    • Note that a ModelIdentifierHasNoSpacesInItAtAll.
  2. Second, get a download manager. You can try doing without, but the reason you're on this page is that you're having trouble getting a file to download reliably. A download manager such as iGetter or Folx solves this problem.
  3. Then, search for your ModelIdentifier in the table below. Click the link to get the download package. Be patient as they are 600MB to over 1GB. It will be much simpler if you do the download in OS X, because OS X can open the downloaded file and also open the dmg file inside it.

  4. Still in Mac OS X, once your pkg is downloaded, double click it and install to a folder on your hard drive so you know where to find it. During the Installation, click the "Change Location" option so that you can choose where it gets installed.Image of OS X Installer step where you can choose the folder to install to

  5. The folder contains a nest of folders, the last of which contains a dmg disk image file. Double click that to open. At last! Here are your Windows installer files.Install BootCampESD 4 Find and Double click the dmg fileBootCamp WindowsSupport.dmg Contents

    BootCamp WindowsSupport.dmg Contents of Drivers Folder

  6. Copy them to a usb drive, or a burnable CD. NB, it’s still 660MB or more, so it’s a full CDs worth of burning time.
  7. Done. You can now proceed with Boot Camp assistant Windows installation and boot the Mac in Windows.

If you must do the download in Windows instead OS X, it's harder. You will need the help on http://www.cafe-encounter.net/p860/opening-a-bootcamp-driver-download-on-windows-7-or-8-with-7-zip to open the pkg file and the dmg file inside it.

BootCamp Direct Download Links

Most of these driver downloads work for both Windows 7 and Windows 8. Windows 8 on 32-bit is not officially supported, but almost everything seems to works on fine on not-officially supported models: the only specific shortcoming I'm aware of is that the screen brightness buttons don't work on all models.

Model Identifier Size & driver release date Direct Download Link
Macmini6,1
Macmini6,2
MacBookPro10,2
iMac13,1
iMac13,2
438MB, 3 Dec 2012 http://swcdn.apple.com/content/downloads/54/18/041-8805/9tglhtxadqtnrro79rsdy4f0mkgu7wg6or/BootCampESD.pkg
MacBookPro9,1
MacBookPro9,2
1,058MB, 15 June 2012 http://swcdn.apple.com/content/downloads/11/05/041-0925/g27es04pw9re5ggrfp3vuf8ew6r53asfz8/BootCampESD.pkg
MacBookPro10,1
MacBookAir5,1
MacBookAir5,2
942MB, 15 June 2012 hhttp://swcdn.apple.com/content/downloads/55/51/041-3891/se4uhpqng48t842cdsosqh28lft54fmswl/BootCampESD.pkg
MacBookAir4,1
MacBookAir4,2
Macmini5,1
Macmini5,2
Macmini5,3
676MB, 23 May 2012 hhttp://swcdn.apple.com/content/downloads/32/33/041-2303/W5jKtsQhhMgMXs3TKhPDqLXrpXyY2HdXMN/BootCampESD.pkg
MacBook2,1
MacBook3,1
MacBook4,1
MacBook5,1
MacBook5,2
MacBook5,3
MacBook6,1
MacBook7,1
MacBookAir1,1
MacBookAir2,1
MacBookAir3,1
MacBookAir3,2
MacBookPro2,1
MacBookPro2,2
MacBookPro3,1
MacBookPro4,1
MacBookPro5,1
MacBookPro5,2
MacBookPro5,3
MacBookPro5,4
MacBookPro5,5
MacBookPro6,1
MacBookPro6,2
MacBookPro7,1
MacBookPro8,1
MacBookPro8,2
MacBookPro8,3
MacPro1,1
MacPro2,1
MacPro3,1
MacPro4,1
MacPro5,1
Macmini2,1
Macmini3,1
Macmini4,1
iMac5,1
iMac6,1
iMac7,1
iMac8,1
iMac9,1
iMac10,1
iMac11,1
iMac11,2
iMac11,3
iMac12,1
iMac12,2
632MB, 23 May 2012 http://swcdn.apple.com/content/downloads/33/54/041-2011/pRtCDYcWShMLxFggy3TzFzmfnnWQNFQBfJ/BootCampESD.pkg

Finding your ModelIdentifier

If you're struggling to find your ModelIdentifier then you want the brilliant page at everymac.com which can tell you what model Mac you have based on serial number. On the result page after you submit, look carefully and you'll the ModelIdentifier.

Still stuck?

If you're still stuck, then:

  1. Look through the comments for people with similar problems -- there have been a couple of hundred so they cover pretty much everything I can suggest.
  2. Try my summary of problems/solutions for direct download of bootcamp drivers

References

See BootCampESD.pkg download instructions for references and for the DIY instructions to work out these links yourself.

365 thoughts on “BootCamp Download Stuck – How to Get Drivers for Macs to run Windows 7 or 8”

  1. hi chris. thanks for the guide. i’ve gone trough the process but when i need to install the package at the end of the process in says : ” Install error. Installer has encountered an error on the installation” .. and so on . I have an iMac12,1 and i can’t install the boot camp drivers. i tough that it may be some error in pkg .. can you help me?

    1. My first suggestion is, do the download again, using a download manager. It does seem surprisingly easy to get what appears to be a completed download that isn’t actually complete. Not sure I have a second suggestion except double check you got the right download?

  2. Hi Chris, thanks for your great work. When I installed the Bootcamp on a Mac Mini 6.2, which I bought a few weeks ago, the following error happened shortly after a progress bar show copying some files. If I click ok, the installation rolls back. Eventually I did a force shutdown and it seems that things are working after the reboot. Is there any way to get rid of this and make the installation complete without any issue? Thanks.

    BTW, it’s a Windows 8 to Go installation.

      1. I haven’t seen Windows to go I’m afraid; but I can tell you that as far as I know most problems are a corrupted downloaded – which somehow seems surprisingly easy to get.
        Is your point that this failing installer keeps coming up every time you start windows? If so you’ve now made it into the world Windows problems (not the world of bootcamp problems) — you should google on something like ‘windows installer cleanup’ or ‘windows installer keeps popping up’

  3. Hi Chris,

    I think I have installed x86 version of Windows 7 on my Macbook Pro (2012 model). My model identifier is MacBookPro9,2. I looked up a package from the above table. Will it work for x86 version of Windows 7 (I am afraid I have loaded the 32 bit version)

    Thanks,
    Pushpendu

    1. Sorry I don’t know for sure – I think your model will do 32 bit but I guess just try it and see. If installing the drivers gives you an error saying it won’t install on this machine, then you’ll know it doesn’t work

  4. i have a MacBookAir5,2 , i downloaded it and the setup couldnt run because of some weird compatibility issue even thuogh it is says correct drivers,
    Can anyone help a brotha out? thanks

    1. Hi Zee, setup not running usually means your download didn’t work properly – try it again with a download manager. The other issue I know of is, that some Macs only support 32 bit windows and some only support 64 bit, but I’m not sure if that applies to mid-2012 models.

Comments are closed.

BootCamp Download Stuck – How to Get D…

by Chris F Carroll read it in 4 min
365